Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide RFL-QCW300/3000
7
c)
The output terminal of the laser is connected to an optic delivery cable. Please inspect
the fiber connector carefully for dust or other contamination. Use appropriate lens paper
to clean it if necessary.
d)
Failure to follow the instructions may cause malfunction and damage to the device.
e)
It is not allowed to install the fiber connector when the laser is in operation.
f)
Do not look into the fiber connector directly. Wear appropriate safety goggles all the
time when operating the laser.
2.5
Announcements
a)
Please make sure that the input DC voltages are 48V (±10%). Failure to connect power
source correctly will damage the device.
b)
Use of controls or adjustments other than those specified herein may result in hazardous
radiation and damage to the laser.
c)
It is very important to ensure the cleanness of the calibrated fiber connector, otherwise it
will cause irreparable damage to the laser.
d)
Please cap the fiber connector when it is not in use. Do not touch the output lens. If
necessary, please use appropriate lens paper and alcohol to clean the lens.
e)
Failure to follow the specified instructions may result in the loss of laser power. Such
loss is not within the guarantee range.
2.6
Specifications
The specifications are listed in the following table.
受
控
武汉锐科
