Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide RFL-QCW150/1500
7
(3) The output terminal of the laser is connected to an optic delivery cable. Please inspect
the output head carefully for dust or other contamination. Use appropriate lens paper to clean it if
necessary.
(4) Failure to follow the instructions may cause malfunction and damage to the device.
(5) It is not allowed to install the output head when the laser is in operation.
(6) Do not look into the output head directly. Wear appropriate safety goggles all the time
when operating the laser.
2.5 Announcements
(1) Please make sure that the incoming DC voltages are 48V (±10%). Failure to connect
power source correctly will damage the device.
(2) Use of controls or adjustments other than those specified herein may result in hazardous
radiation and damage to the laser.
(3) It is very important to ensure the cleanness of the calibrated laser output head ,
otherwise it will cause irreparable damage to the laser.
(4) Please cap the output terminal when it is not in use. Do not touch the output lens. If
necessary, please use appropriate lens paper and alcohol to clean the lens.
(5) Failure to follow the specified instructions may result in the loss of laser power. Such
loss is not covered under warranty.
2.6 Specifications
The specifications are listed in the following table.