Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C20000TZ
14
Figure 8 Output optical cable with white dust cover removed
c) Use a cotton swab and anhydrous ethanol to clean the metal casing of the optical cable, then
remove the end cap (with window) attached to the optical cable, and place it on a clean paper .
Figure 9 Remove the A -type end cap on the optical cable
d) Check the cleanliness of the end caps in this state. If the cleanliness is not enough, please clean
the end caps. Please refer to the cleaning method: http://www.raycuslaser.com/view/1852.html ,
video reference:https://mp. weixin.qq.com/s/hRXrPkb8DAyvDYegSWwYLg .
Note: The end cap cleaning is generally performed by our professional staff. If the
customer needs to operate it by himself, we need to go through the relevant training of our
staff and obtain the relevant qualifications before the above operations can be carried out.
If the operation method is improper, it will cause irreversible and serious damage to the
output optical cable during use.
After ensuring the cleanliness , install the B- type end cap. During the installation process, there
will be resistance when screwed to the bottom, which is a normal phenomenon. It is necessary
to ensure that there is no gap between the end cap and the main body sleeve. And then check the
finish and cleanliness of the end cap's glossy surface, as
Figure
shown. Then connect the fiber
optic cable output head to the cutting head (or welding head) with the B- type end cap installed.
