Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus RFL-A4000D~A12000D
16
lock. When you are not using the product, you can cover the power input socket with the protective cover
and lock it with the lock.
②
BREAKER:
the circuit breaker (air switch) on the rear panel of the laser is the main power
switch of the laser.
③
AC INPUT:
the power input socket must be matched with the plug provided by us. This socket
comes with a protective cover and a lock. When you are not using the product, you can cover the power
input socket with the protective cover and lock it with the lock.
④
WATER IN:
The water inlet of the laser, this interface is connected to the water outlet of the
cooling water of the water cooler.
⑤
Filter:
filter the cooling water into the laser.
⑥
WATER OUT:
The water outlet of the laser, this interface is connected to the water inlet of the
cooling water of the water cooler.
4.3
Power Connection
CAUTION:
a)
Before connecting to the AC power supply, please check whether the supplied AC power
supply meets the requirements in Table 1;
b) Incorrect wiring will cause damage to the laser, so please check whether the power cord is
connected correctly before powering on the laser.
Figure 9 shows the power cord provided by Raycus.
Figure 9 Laser source power cord
