Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus RFL-A4000D~A12000D
52
8.3.4
Programming mode test area
The laser programming mode test area interface is shown in Figure 39, in which the ‘START’ button
is used to test the programming of the programming mode. This function can only run internal mode
(when external mode is turned off). Enter the current pre-tested programming number in the digital text
box and click the START button.
Figure 39 Laser programming mode test area display interface
8.3.5
Power slow rise & down parameter setting area
The interface of the laser power slow rise & fall parameter setting area is shown in Figure 40. Click
‘Get’ to read the power rise and fall times stored in the laser. Click ‘Set’ to set a new power rise and fall
time. When the rise and fall, times are set to 0, the power slow rise & fall function is automatically
switched off. When there is no 0, the slow rise or fall function is automatically turned on.
a)
