RaycoWylie i4500, Instruction Manual

Page: 66 / 91

55M4500EBE00A-A
66
i4500 Lattice Boom Crane
Instruction Manual
4.6.3 Free Zone
1. Repeat steps 1 to 3 in the accessing
range limiting mode section (see
section 4.6.1 on p. 64)
2. Press the Down button to highlight
«Free Zone» and press the Select
button to confirm your choice.
3. Rotate the crane to the first limit position (first wall).
4. Press the Select button to confirm the position of the first wall.
5. Rotate the crane to the second limit position (second wall).
6. Press the Select button to confirm the position of the second wall.
7. As you release select button, a 10 seconds countdown will allow you to rotate
the crane between the two walls before your programmed free zone limit
becomes active.
66
The free zone is a zone without
height limits. It is limited by side
walls. The boom can’t go beyond
these walls.
VIEW fROm TOp
second wall
first wall