RaycoWylie i4500, Instruction Manual

Page: 13 / 91

13 i4500 Lattice Boom Crane Instruction Manual
55M4500EBE00A-A
-1-
General description of the system
1.2 Qualifications
The i4500 system shall be only operated by personnel who have no limitations in
the physical abilities of the upper limbs and no visual or hearing impairment. The
personnel must have completed all operator trainee qualification requirements
and have read and fully understood the instructions in this manual. Operator
requirements include: demonstrating the ability to read, write and use arithmetic.
He must also be able to read and understand the load / capacity charts in the
language used in the crane manufacturer’s operating instruction materials.
Maintenance of the system is intended only for fully qualified and trained personnel..
1.3 Intended Use
The i4500 system is intended to provide a valuable aid to the crane operator by
indicating all relevant parameters typically shown on the duty chart of the crane.
The i4500 system shall prevent the crane from supporting a load outside the
loads shown and described on the rated capacity chart when set, calibrated and
operated correctly.
This manual contains Operation, Troubleshooting and Maintenance information
for the i4500 system. When using the i4500 system, always observe the safety rules
and regulations applicable in the country where you operate the crane to reduce
the risk of injury or damage to the equipment. Each safety instruction throughout
this manual must be taken into consideration when using the i4500 system. The
information contained in this manual will enable qualified personnel to properly
operate the system and do the maintenance efficiently.
1.1 Introduction