RaycoWylie i4500, Instruction Manual

Page: 31 / 91

31 i4500 Lattice Boom Crane Instruction Manual
55M4500EBE00A-A
-3-
installation and calibration
Installation of the i4500 system shall be done by a qualified technician. Furthermore,
calibration of the i4500 system must be done by a RaycoWylie certified technician.
The RaycoWylie technician will do a complete and structured verification of the
whole system before beginning the calibration of the system.
Failure to properly calibrate the system can result in overloading the crane.
This can cause machine breakage or tipping that could result in serious
injury or death. Always refer to a RaycoWylie certified technician to
calibrate your system.
Installation and calibration manuals are available upon
request at RaycoWylie. Please note that the installation and
calibration instructions have intentionally not been included
in this instruction manual.
-4-
operating instructions
4.1 Safety Instructions
When operating the i4500 system, always respect the safety rules and
regulations applicable in the country where you operate the crane to reduce
the risk of injury or damage to the equipment. Read the following safety
instructions before attempting to operate this system.
1. The i4500 R ated C apacity I ndicator must be properly set up according to
the working site and to the configuration of the crane. A wrong set-up can
cause the i4500 indicator system to show unreliable information which
may cause hazardous conditions such as an overload.
2. The i4500 system is only an aid to the operator. Responsibility for the
safe operation of the crane lies with the crane operator. The i4500 system
will not necessarily prevent crane damage due to overloading and/or other
related causes.