Rayco RG165T-R Operator, Service, Maintenance Manual Download Page 6

Page: 6 / 72

RG165T-R Operator · Service · Maintenance

Foreword

Machine Description

The Rayco RG165T-R is a high-production stump cutter

peak torque of 355ft-lbs. The large displacement gas engine

provides the power demanded for large jobs with out the

need for after treatment when comparing to a diesel engine.

The RG165T-R features remote operation to provide the

operator with options on where to operate the machine.

The remote offers a digital screen to supply the operator

with remote and machine data to monitor the machine while

in operation.

The RG165T-R is equipped with expandable/retractable

tracks and a folding rear blade. With this feature, the machine

is able to pass through narrow gates and passages.

Summary of Contents for RG165T-R








































































Search results

Summary of Contents for RG165T-R

Reviews:

Related manuals for RG165T-R

Brands by name

Popular brands

Rayco RG165T-R, Operator, Service, Maintenance Manual

Search results

Summary of Contents for RG165T-R

Reviews:

Related manuals for RG165T-R

Brands by name

Popular brands