SEE FIG. 24
Follow instructions in sections BURNER ACCESS, Steps
1 to 3, and BURNER REMOVAL.
1.
Remove both HT leads from ignitor.
2.
Remove mains plug from ignitor.
3.
Remove 2 ignitor securing screws.
4.
Remove ignitor.
5.
Fit new ignitor, re-assemble in reverse order.
SEE FIG. 25
Follow instructions in sections BURNER ACCESS, Steps
1 to 3, and BURNER REMOVAL.
1.
Remove plug.
2.
Remove solenoid securing nut and washer.
3.
Remove solenoid coil.
4.
Fit new solenoid coil, re-assemble in reverse order.
18
Replacement of parts (Burner)
Fig. 24
DESN 516265
SOLENOID COIL
IGNITOR
Fig. 25
DESN 515972
SOLENOID
Summary of Contents for 680KCD C
