RAYFace Appendix B. Messages
87
Message
Cause
Guide
This path cannot be set
to save captured data.
The path where the
current captured data is
saved is seleted as the
new save path.
The path in which the current captured
data is saved cannot be designated as a
new path.
Choose another path.
Unable
to
load
captured data.
A
problem
occurred
when copying to the
captured data path while
importing data.
Make sure that there is enough space in
the captured data path and the data is
accessible.
Captured date cannot
be imported from the
selected path.
The path where the
captured data is saved
has been selected as the
import path.
Unable to import from the path where the
captured data is saved.
Choose another path.
There is a problem with
the database.
There is a problem with
RAYFace's
database
and the list of subjects
and scan data could not
be read.
Contact your sales representative.
A problem occurred
during communication
with calibration kit.
The calibration kit was
not
connected
to
RAYFace.
Please connect or reconnect the
calibration kit to RAYFace and restart the
device.
The calibration cycle
has been exceeded.
Too much time has
passed since the last
calibration. .
Please re-calibrate RAYFace. .
No scanner calibration
was performed.
RAYFace has not been
calibrated.
Please calibrate RAYFace.
Summary of Contents for FACE
