ray FACE, User Manual

Page: 14 / 91

RAYFace 2. Product Introduction
14
Sections and Functions (Scanner Body)
[Front] [Rear]
Items Description
1
Power Switch
Main power On/Off switch.
2
DC IN Port
Terminal to connect the AC adapter plug. Connect one side
of the power cord to the AC adapter before connecting to
the outlet.
Attention: The power cord type may differ depending
on the region.
Warning: Do not use other AC adapters.
3
PC Port
Port for the RAYFace setup during installation.
4
Ethernet Port (RJ45)
Port to connect an ethernet cable.
5
Status Indicator
LED to indicate the equipment status.
6
Left Camera
Camera to scan an image from the left.
7
Right Camera
Camera to scan an image from the right.
8
Bottom Camera
Camera to scan an image from the bottom.
9
Teeth Cam L Camera to scan the left side of the teeth.
10
Teeth Cam R
Camera to scan the right side of the teeth.
11
DLP Projector
Projector to project a Scan Pattern.
12
Face Cam
Camera to scan an image from the front.
13
Left Light
LED lighting
for a subject’s left side of the face.
14
Right Light
LED lighting
for a subject’s right side of the face.
15
Bottom Light
LED lighting
for a subject’s lower side of the face.
16
Mirror
Mirror where a subject can check his or her appearance.
17
Calibration Port
Port to connect the Calibration kit.