13
GB
Assembly and use
Please refer to the illustrations at the front of
these instructions.
Once you have assembled the stand, place
it on a fl at, stable surface with the legs fully
extended.
Adjust the telescopic shaft so that the clamp
is at the desired work height.
The telescopic shaft must not be extended
above the maximum mark shown in fi gure 1
on page 2.
Then open the clamp and place the bicycle
frame into it.
Tighten the clamp so that the bicycle is held
securely in place.
Hook the handlebar stabiliser securely
between the stand and the bicycle’s
handlebars so that the front fork does not
swivel unintentionally.
The clamp can rotate 360° so that the bicycle
can be secured in the most appropriate
position. Be sure to tighten the screw that
holds the clamp at the required angle.
As you work you can place spare parts and
tools on the tray.
Cleaning and maintenance
Clean the stand regularly using warm
water and a pH-neutral soap. Always dry it
afterwards with a soft cloth. Store the stand
in a dry, well-ventilated place.
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacement parts
• Returns
• Guarantee issues
• www.schou.com
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.
Summary of Contents for 36609
Page 2: ...2 1 2 3...
