Fast and Furious Arcade
40 |
P a g e
Problem
Possible Cause
Solution
Message on screen:
Insufficient RAM, 16GB
required.
Loose or disconnected
RAM stick.
Contact your distributor for service.
Faulty RAM stick.
Contact your distributor for service.
Message on screen: GFX
card missing. Please
RECONNECT the GFX card.
Loose or disconnected
graphics card.
Contact your distributor for service.
Faulty graphics card.
Contact your distributor for service.
Game does not load.
PC hard drive failure.
Recover hard drive.
See Flash Installer Document or contact your
distributor for the latest software revision.
PC Drive test reports “bad”
or “missing” files.
Game fails to finish loading.
After resetting, game still
reports an error.
Erratic game mode or
attract mode.
WARNING!
Data files Corrupted.
(Game Operation May
Become
Unstable.)
Game Resets
Bad file.
Run Flash Installer.
No Video
PC not turned on.
Turn PC power switch on. Ensure IEC cable tightly
plugged in. Trace cable back to source to ensure
continuity.
Video cable not secure.
Check and secure HDMI connector(s) to
Monitor(s). Check and secure DVI or HDMI
connector(s) to PC.
Cabinet was powered
on too quickly after a
manual
shutdown/power loss
Shut off cabinet via both switches at rear of
cabinet. Leave off for 30 seconds, then power
back on.