Fast and Furious Arcade
38 |
P a g e
Troubleshooting
Warning: Review the Safety section before making any adjustments to the game.
Problem
Possible Cause
Solution
Game will not power up.
Game not plugged in.
Plug game into AC outlet.
Game not turned on.
Turn on main power switch.
Game fuse is blown.
Check and replace fuse. See Specification section
for fuse values.
No power to
receptacle.
Test AC outlet and plug game into powered
outlet.
PC BIOS set incorrectly. Contact your distributor.
Flash Drive Installer is
left connected to PC.
Disconnect Flash Drive Installer and power cycle
the game.
Buttons do not work.
Faulty micro switch.
Replace the micro switch on the button and re-
test. Verify that the wires are connected to the
correct spades on the micro switch.
Faulty wiring.
Disconnect the cabinet from AC power. Verify
that all wires are firmly connected to each button
and the PCB. Verify that no wires are frayed or
improperly shorting to ground. Verify that wires
are connected to the correct spades on the micro
switches.
Faulty PCB.
Ensure all connections to PCB are secure. Replace
PCB if faulty.
Neither buttons nor audio
work.
PCB connected to faulty
USB port (boot
message may indicate
not detected)
To test a USB port, turn off the game, disconnect
the device from the port, and then connect the
game dongle to the port. Reboot the game. A No
Dongle message indicates the port is bad. If the
game starts, the port is working. After the test,
reconnect all devices to the correct USB ports and
reboot.
