Fast and Furious Arcade
37 |
P a g e
PC Hard Drive Recovery
Symptoms requiring a PC hard drive recovery include:
•
File test reports bad or missing files.
•
Game fails to finish loading during setup.
•
After resetting the AC power, an error is reported.
•
Erratic Game or Attract Mode behavior.
The only way to repair corrupt files is to reinstall the software as described below:
Computer
The computer contains sensitive components. Do not handle roughly. Contact your distributor before
servicing its internal components. Ask about warranty information as it relates to the PC.
Do
not
use the PC on/off switch. Turn AC power on or off with the cabinet power switch.
Steps to reinstall the software (the game ships with (1) USB drive which is used in the steps below):
(USB Thumb Drive is used on the
Lenovo M70t
)
***
ATTENTION: An approved “Business Account” on rawthrills.com is required to complete software
installation. Please complete account activation before installing software!***
https://rawthrills.com/raw-web/login
***
1.
With game and PC on, verify that the RIO2 board has power. If not, see Troubleshooting.
2.
Open the upper back door of the cabinet.
3.
Insert the recovery USB thumb drive (included in your game) into an open USB port on the PC.
4.
Turn cabinet power switch to OFF. Wait 30 seconds.
5.
Turn cabinet power switch to ON. Wait for install menu to load.
6.
Once the install menu has loaded, press the Test button on the service bracket to select the
installation program and then press the Test button to confirm that you want to continue with
the installation.
7.
Follow on screen instructions to begin recovery.
8.
If recovery does not begin, check to ensure USB Drive is inserted correctly and is not damaged.
9.
Initial software loading may take several minutes. Check progress periodically.
Do not interrupt power or reset the game during recovery.
10.
When software has been loaded, a message indicates that restore is complete. When instructed
to remove USB Drive, wait 15 seconds then remove the drive from the PC.
11.
Turn cabinet power switch off. Wait 30 seconds. Turn the cabinet on again.
12.
Scan the QR code to the left or
click here (if viewing on electronic device)
for instructions on completing setup.
