Fast and Furious Arcade
12 |
P a g e
Top Monitor Hanger Bracket Installation
1.
Unpack remaining monitor and lay face down on a soft surface.
2.
Install the standoff spacers into the (4) mounting holes in the back of the monitor (
fig. c
below).
3.
Set hanger bracket in the position shown so the top mounting holes line up with the upper standoffs
(
fig. c
below).
4.
Insert (2) 8Mx50MM screws, flat and lock washer (
fig c
below) and tighten hanger bracket to
monitor securely. ***DO NOT OVERTIGHTEN***
fig. c
Completed Assembly
fig. d
