![background image](http://html.mh-extra.com/html/raven/vsn/vsn_operation-manual_789015040.webp)
CHAPTER 5
36
VSN® Operation Manual
RADAR SETTINGS
To tune the radar row sensor settings:
1. From the VSN home page, select the Tools button.
2. Select the System Settings tab.
3. Select the Radar Settings button. The following settings and options will be available.
FIGURE 7. Radar Sensor Settings
Right/Left Side Serial Number.
Use the drop down options to set the orientation of the radar sensors on the
machine.
Swap.
Select the Swap button to switch the left and right side radar sensor assignments.
Redetect.
Use the Redetect button to have the system scan for new sensors connected to the system. Use this
feature if a sensor is replaced or is not currently displayed as an option for available radar sensors.
Radar Angle.
Set the horizontal angle of the radar sensors. This angle is measured using the direction of forward
vehicle travel as 0°.
NOTE:
The factory radar brackets are designed to mount the radar sensors at a 45° angle with the forward
course over ground. Enter the radar sensor angle as a positive value.
Radar Offset Distance.
The offset distance from the centerline of the tire to the radar sensor lens.
Radar Time Constant.
This value allows the system to avoid processing of certain types of radar targets.
NOTE:
The default radar time constant value is 38 milliseconds. It is not recommended to adjust this value
unless instructed by Raven Technical Service.
System
Settings
Radar
Settings
Tools
Swap
Redetect
Summary of Contents for VSN
