Raven SmarTrax, Installation Manual, Page: 23 / 59

3
Manual No. 016-5034-004 19
Hydraulic System Installation
FIGURE 8.
Tank Hose Installed
1.
Locate and disconnect the tank hose from the machine’s hydraulic valve, located between the hydraulic
valve and the cab.
2.
Install a -6 ORFS M/F 90° swivel elbow fitting (P/N 333-0012-065) on the open port of the machine’s
hydraulic valve.
3.
Install a -6 ORFS M/M/F swivel run tee adapter fitting (P/N 333-0012-069) on the installed elbow fitting.
4.
Connect the machine’s tank hose to the opposite end of the installed tee fitting.
5.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-761) to the 90° end of the installed tee
fitting.
6.
Label the 90° end of the installed hydraulic hose with a “T.”
Note:
The installed hydraulic hose will be connected to the SmarTrax valve (P/N 334-0003-088) later in
the installation procedure.
7.
Route the installed hydraulic hose to the installed universal bracket (P/N 107-0171-578) mounting location.
Install the Load Sense Hoses
Note:
Loosely install the connections to the machine’s load sense connection. Do not tighten the
connections until instructed to do so.
Installed Pressure Hose
(P/N 214-1000-760)
Installed Tee
Adapter Fitting
(P/N 333-0012-069)
Installed Tank Hose
(P/N 214-1000-761)
Back of Machine’s
Cab)
Machine’s Tank
Hose