Raven SmarTrax Case IH Steiger 335, Installation Manual

Page: 21 / 36

CHAPTER
4
Manual No. 016-5032-004 17
Chapter 4
Cab Component
Installation
Install the SmarTrax Node
Mount the SmarTrax Node
Note:
The SmarTrax node (P/N 063-0173-228) is sold separately. Contact your local Raven dealer for
ordering information.
FIGURE 1.
SmarTrax Node Installed
1.
Mount the SmarTrax node to the node mounting bracket (P/N 107-0172-084) using three 3/8”-16 nylon
insert lock nuts (P/N 312-4000-061).
2.
Install the two large, rectangular connectors of the node harness (P/N 115-4001-126) into the correct ports
of the node.
3.
Tighten the bolts on the harness connectors to secure the connections.
4.
Place the node mounting bracket under the instructional seat, aligning the holes in the mounting bracket
with the existing holes in the cab floor.
Note:
The node connectors should be pointing toward the operator’s seat.
5.
Secure the node mounting bracket to the floor using four M6 x 1.00 x 20 mm bolts (P/N 311-0070-010), four
1/4” flat washers (P/N 313-2300-009), and four M6 lock nuts (P/N 312-4000-207).