![background image](http://html.mh-extra.com/html/raven/rgl-600/rgl-600_operation-manual_789029058.webp)
53
IAS Configuration
When a Smartbar has a Tilt Sensor Upgrade Option installed, a new top level config-
uration menu (IAS) is added just prior to the DIA top level configuration menu. Press
the DOWN button at the IAS top level menu to enter the IAS configuration sub-menus.
IAS configuration sub-menus are used to setup the tilt correction calculation para-
meters and to calibrate the tilt sensor:
TLT - Tilt Control Mode
Press SELECT button to select between Tilt Control Modes:
DIA
Diagnostics
IAS
Inertial
Augmentation System
AHT
Antenna Height
ANG
Angle - degrees
Calibrate
Tilt Sensor
1.0-40.0 feet
0.10-9.99 meters
degrees indication
-179 to 0 to 180
left level right
OFF, SLO, NRM, FST, or VFS
TLT
Tilt Mode
Inertial Augmentation System Configuration Menu
press MENU Button
press DOWN Button
press SELECT Button
Automatic (no button press)
Tilt
Control
Mode
Description
Function
OFF
Off
Smartbar tilt sensors have no effect on swath guidance
SLO
Slow
The tilt angle filter has the greatest effect. The effective tilt angle
will change slowly. This mode is used for rough fields with
gradually changing slopes.
NRM
Normal
The tilt angle filter will have a medium effect. The effective tilt angle
will change normally. This setting is usually used for the tilt control
mode.
FST
Fast
The tilt angle filter has only a small effect. The effective tilt angle
will change fast. This mode is used for smooth fields with rapidly
changing slopes.
Summary of Contents for RGL 600
