![background image](http://html.mh-extra.com/html/raven/rgl-600/rgl-600_operation-manual_789029040.webp)
35
DH 3
mark
DH 4
mark
DH 1
mark
DH 2
mark
B
mark
A
mark
Enter
Field
Here
The Double Headlands C pattern provides parallel swathing between two straight double
headland areas. Using the C pattern, swathing progresses toward an “open” end, allowing the
last swath to easily align with the edge of the field. This pattern can be used with Swath Types
(SWA) Back and Forth (BF) or Snap-To-Swath (SNP) and uses the direction (DIR) control
AUT/MAN setting to determine the layout of the C pattern.
Three line segments define the Double Headlands C pattern (DHC): DH1-2, A-B, and DH3-
4. (see diagram on this page). The DH1-2 line defines the first Double Headland area. The A-
B line controls the orientation of all subsequent swaths between the headland areas. The
DH3-4 line defines the second Double Headland area. These three line segments may be at
any angle or orientation so long as the general shape of the letter “C” is formed. Guidance
along the inside of DH1-2 and DH3-4 includes ON/OFF indicators (similar to headland con-
trols) on the center top and bottom RGL 600 green LED’s. These indicators direct the opera-
tor to turn the applicator ON or OFF so that the headland swath, which is inside of DH1-2, can
be the same length and alignment as the DH1-2 line, if desired. The DH3-4 inside headland
swath is controlled similarly. The exact shape of the field will determine if and how these
indicators are used. Marking of the A-B line is independent of DH1 and DH3 marks, although
the A mark is close to DH1 and the B mark is close to DH3. This allows some flexibility in the
corners of the field along the A-B line. The A-B line should be marked carefully as it controls
the position and direction of all subsequent swaths between the headland areas. The area
covered by the Double Headlands C pattern and swathing is calculated and displayed at the
end of guidance along the DH3-4 inside headland.
Double Headlands C pattern
Summary of Contents for RGL 600
