Raven RCM-Sprayer Hawkeye 2, Calibration And Operation Manual

Page: 75 / 124

Troubleshooting: Diagnostic Trouble Code (DTC) List 65
TROUBLESHOOTING
520593
.5 NB HS current low multiple
1. Reduce operating speed.
2. Verify the NCV2 voltage is above 10.5 V.
3. Check the system cabling for damage.
4. Check the NCV2 duty cycle for proper
operation.
5. Contact a local Raven dealer if the issue is not
resolved.
.6 NB HS current high multiple
1. Reduce operating speed.
2. Verify the NCV2 voltage is above 10.5 V.
3. Check the system cabling for damage.
4. Check the NCV2 duty cycle for proper
operation.
5. Contact a local Raven dealer if the issue is not
resolved.
523008
.2
NCV2 calibration tip
mismatch/error
1. Select the appropriate tip type. Refer to the
Select Tip Page section on page 22 for
additional assistance.
2. Edit the profile to reset the tip type setting for
the nozzle control system.
3. Cycle system power and reset defaults.
.31 No NCV2 tip size selected 1. Enter a NCV2 tip size into the Select Tip page.
523009 .2
NCV2 calibration spacing
mismatch/error
1. Edit profile to re-enter the tip spacing
measurement.
2. Cycle system power.
523088
.12 NCV2 memory error (single)
1. Cycle system power.
2. Edit profile.
3. Contact a local Raven dealer for additional
assistance.
.31
NCV2 memory warning
(single)
1. Cycle system power.
2. Edit profile.
3. Contact a local Raven dealer for additional
assistance.
523089
.12 NCV2 memory error (single
1. Cycle system power.
2. Edit profile.
3. Contact a local Raven dealer for additional
assistance.
.31
NCV2 memory warning
(multiple)
1. Cycle system power.
2. Edit profile.
3. Contact a local Raven dealer for additional
assistance.
523090 .1
NCV2 calibration error
(single)
1. Cycle system power.
2. Edit profile.
3. Contact a local Raven dealer for additional
assistance.
Code ID Description Recommended Actions