Raven Hagie DTS 10, Installation Manual

Page: 5 / 11

Manual # 016-1001-042
3
C
H A P T E R
2
I
NSTALLATION
Use the following procedure to properly install the CAN AccuBoom
system.
1. Disconnect main harness cable from 4x0/6x0 console and tee
in AccuBoom harness.
2. Locate “Solution Valves” harness behind seat and tee in
Accuboom harness labeled “Solution Valves Tee”.
Note: AccuBoom will not control boom lights. Boom
lights will remain ON at all times during AccuBoom
operation. Boom lights will function normally when
spraying without AccuBoom.