Raven Hagie DTS 10, Installation Manual

Page: 7 / 11

Manual # 016-1001-042
5
C
H A P T E R
3
D
IAGNOSTICS
The CAN AccuBoom Node P/N 063-0172-316 has additional features to allow the
user to diagnose the AccuBoom system. The CAN AccuBoom node has a
plastic window in the case that allows the user to view green diagnostic lights.
The picture below shows the positioning and function of each of the LED lights.
Logic Power
Micro 1 Hz
CAN Rx
CAN Tx
High Current
Power (HC)
Š
Logic Powr: Lit when 12VDC logic power is available at the node.
Š
Micro 1 Hz: Flashes at 1 Hz interval when processor is active.
Š
CAN Rx: Flashes when CAN messages are being received.
Š
CAN Tx: Flashes when CAN messages are being transmitted.
Š
High Current Power: Lit when High Current Power is applied to teh node.