Raven Hagie DTS 10, Installation Manual

Page: 3 / 11

Manual # 016-1001-042
1
C
H A P T E R
1
I
NTRODUCTION
Congratulations on your purchase of the Raven AccuBoom system! This system
is designed to provide worry-free turn on and turn off of your booms with respect
to the as-applied coverage map. The following instructions are designed to
assist you in the proper installation of the AccuBoom system. See the Installation
and Operation Manual of your particular console for instructions on setting up the
software and using the AccuBoom system.
Basic Kit
Contents
Š
AccuBoom CAN Node
Š
Machine Specific or Standard Console Cable
Š
CAN Tee Cable: 6”, 6’, 12’, 18’, or 24’ long
Š
Install Manual
Helpful Hint: If no CAN system currently exists on the
machine, an additional CAN Power Tee
Kit is required.
Important! All boom switches must be in the OFF
position while AccuBoom control is in operation!