![background image](http://html.mh-extra.com/html/raven/flexgate-47800a-flxg/flexgate-47800a-flxg_user-manual_789077007.webp)
6/36
2 Creating Interfaces
2.1 How to add a new interface
You will be able to configure a variety of interfaces depending on the license you have purchased. You can see the
interfaces allotted to your system by examining the left-hand panel, as illustrated in Figure 2-1. You can create a new
interface by clicking on the name of it in the left-hand panel. Each interface represents a single endpoint to which audio
can be streamed to and from. Depending on the type of interface, this endpoint could, in turn, relay this audio to and
from numerous device (e.g. a SpectraLinkPtt interface relays to and from a multicast address).
Figure 2-1: Home screen for the FlexGate web configuration tool. The left side displays the different interfaces
that are available. The right side of the screen displays the interfaces that have already been created
.
Note:
If you don’t have any interfaces listed or they mistakenly show an incorrect number of
interfaces allotted, please refer to the troubleshooting section.
When traversing through interface configuration screens you will be provided with some descriptions of each individual
setup field as you click on them. Once an interface is configured, you will be able to enable or disable it at will from the
home page. Disabling an interface frees up a license for another interface of the same type, but also makes the interface
unable to transmit or receive audio.
The following sections illustrate the process for configuring specific interface types.