7
5. Touch the
Pattern
button to select one of the available Guidance patterns for
the job:
6. If the optional AccuBoom™ feature will be used, touch the
AccuBoom
button
to enable the feature. To create or load a spray zone map, select the
‘Use
Spray Zone Map’
option.
7. Touch the
Product 1
or
Product 2
buttons to select the control mode and set
the target application rate for the job. If the optional Single Product Variable
Rate key has been activated, a Prescription Map may be selected by touching
the
symbol on the product button.
8. If the optional AutoBoom™ system will be used, the system may be enabled by
selecting the
AutoBoom
button. See the
AutoBoom
section in this guide or the
AutoBoom Calibration & Operation
manual for more information.
9. When finished setting up features and options for the job, touch the
icon
on the
Start Job - Verify Settings
screen to accept the displayed settings and
display the Envizio Pro
Guidance
screen.
Guidance Screen
The Envizio Pro
Guidance
screen is the main screen viewed during product
application.
1.
The
On-Screen Light Bar
is displayed along the top of the
Guidance
screen.
Settings for the light bar may be found by selecting:
Enhanced
Last Pass
Straight
(A-B) Line
Pivot
Fixed
Contour
1
7
11
9
12
8
10
2
3
5
4
13 14
6
15
16
17
18
19
Tools Menu
System
Menu
Light Bar
