5
2.
MOUNTING THE FLOW METER
l)
l)
l)
l)
l)
Mount the Flow Meter in the area of the boom valve per
Figure 2
. All flow through
the Flow Meter must go to the boom valve only, i.e. no return line to tank or pump
after Flow Meter.
2)
2)
2)
2)
2)
Mount Flow Meter horizontal to the ground. Use the bracket to secure the Flow
Meter.
3)
3)
3)
3)
3)
For best results, allow a minimum of 7 1/2 inches [20cm] of straight hose on inlet
of Flow Meter. Bend radius of hose on outlet of Flow Meter should be gradual.
4)
4)
4)
4)
4)
Flow must be in direction of ARROW on Flow Meter.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE: For flow rates less than 3 GPM [11 lit/min], mount the Flow Meter
vertically with arrow pointing upward. (Refer to
Appendix 1
for
alternate plumbing diagram).
NOTE:
NOTE:
NOTE:
NOTE:
NOTE: It is essential, when using suspensions, that the system be thoroughly
rinsed out each day after use. Failure to do so may cause system to
malfunction.
FIGURE 2
FIGURE 2
FIGURE 2
FIGURE 2
FIGURE 2
5
