C
HAPTER
4
22Case IH Patriot 250/2240/2250 & New Holland SP2500 (80’-100’ Booms) AutoBoom® Installation Manual
MOUNT THE BOOM SENSORS
FIGURE 2. Sensor Installed on Mounting Bracket
1. Install the left and right ultrasonic sensors (P/N 063-0130-012 and 063-0130-014) on the ultrasonic sensor
mounting brackets (P/N 107-0172-501) using four 3/8”-16 x 1-1/4” hex bolts (P/N 311-0054-081) and four 3/8”-16
zinc flanged lock nuts (P/N 312-1001-164) per sensor.
FIGURE 3. Left Boom Sensor Installed
2. Mount the left boom sensor assembly on the front of the left outer boom section using two 2-1/16” W x 3” L x
3/8” thread U-bolts (P/N 107-0171-609) and four 3/8”-16 zinc flanged lock nuts (P/N 312-1001-164).
NOTE:
Ensure that the sensor does not contact the inner boom section when the boom is folded in toward
the cab.
WARNING
The machine must remain stationary and
switched off, with the boom unfolded and
supported, during installation or maintenance.
