Ravelli RBH 150 V, Manual

Page: 88 / 276

Use and maintenance manual RBH 150 V - RBH 200 V
Pag.32
Rev.2 14/01/2021
The display is subdivided into three parts It shows the current room temperature measured by the handheld set. Moreover, if
you press the DOWN scroll key you will display the temperature settings that can be changed using the two UP/
DOWN keys. Any change made is confirmed automatically within 3 seconds from the change or by pressing the confirmation key. A
sound signal indicates that the change has been confirmed
In the inactive phases (combined with the 3rd part of the display) indicates the state of the stove.
In the active phases, it indicates the operating power of the stove.
In addition, by pressing the DOWN scroll button, you can display the power settings, that can be edited using the two scroll
keys UP/DOWN: The confirmation of any change takes place automatically within 3 seconds from the change or by pressing the
confirmation key. A sound signal indicates that the change has been confirmed. .
Icon that indicates the status of the thermo-stove (see synthetic phase diagram).
2
1
Press the key from STAND-BY mode to quickly display the real and active states of the stove as shown in the figure
below:
POWER: It shows the real power that can be - MIN: minimum settable power (see power selection menu);
- MAX: maximum settable power (see power selection menu);
the stove is set to maximum power each time it is turned on
- MOD: stove modulation with set parameters reached;
- SANI: if the quick DHW kit is provided, as soon as there is a request for
domestic hot water, the stove switches to DHW power
automatically;
PUMP: the writing ON indicates that the circulator is active and enables water circulation within house system;
3-WAY VALVE: it shows the position of any 3-way valve installed, if there is a quick DHW heat exchanger installed or a DHW boiler
PRESSURE: it indicates the actual pressure of the system read by the transducer installed on the stove.
Press this key to return to STAND-BY page.
POWER
PUMP
PRESSURE 1.1 bar