6/28/2011 DOC.NO.: 150D - 1
P/N RE 150D Rev. No. 1
14
WALK TEST Key:
For testing of detector or MCP, we can go for
walk test mode by pressing this key. This mode can identify by
walk test LED ON / OFF. And this same key is used to quit from
walk test mode.
Note:
During in walk test mode, if there is no more operation
in the testing, automatically it will quit from walk test mode after
10 minutes.
2.4
Mechanical Construction
The enclosure of the Panel is constructed by CRCA sheet
with powder coated finish and it’s designed to afford the degree
of protection as per IP-54. The
∅
19
mm knock outs are given for
cable entry at the top of the cabinet.
The panel also has a built in battery provision to
accommodate 2 Nos. of 12v, 7Ah batteries (Up to 12 Zone).
The front side of the panel consists of the following,
a.
Tactile switches.
b.
LED indications
