Rave Sports Super Shuttle 02964 Owner'S Manual Download Page 15

 

14 

 

Super Shuttle & Parasail Boat Docking Procedure 

 

The Super Shuttle must dock along the side of the moving 
Parasail Boat.   

 

The PWC and Shuttle should approach from the stern of the 
moving Parasail Boat, on a parallel course with the Boat.  

 

PWC slowly passes the moving Boat and positions itself in 
Front of the Boat to carefully position the Super Shuttle next 
to the side of the Boat. 

 

Shuttle is correctly positioned when the forward docking line of the Shuttle is aligned with the 
desired and predetermined cleat of the Boat.   

 

Once the Shuttle is in the correct position, the Boat Captain will signal the PWC driver to 
MATCH the speed of the Parasail Boat so the 
Shuttle can be securely tied and docked.  

 

Boat Crew secures Shuttle TIGHTLY to the side 
of Boat using pre-attached dock lines on the 
Shuttle. Dock lines are tied to the stainless 
steel D-Rings located on the Shuttle

s side 

tubes. 

 

Shuttle dock lines must be secured TIGHTLY to 
the Parasail Boat cleats, in this order: 

1. Forward/nearest the bow of Boat 
(or use cleat nearest to Captain). 
2. Rear/aft of Boat (use cleat nearest 
the stern of boat). 

 

IMPORTANT:  Make sure the shuttle is drawn 
tightly against the side of the parasail boat 
before transferring passengers. 

 

To undock the Super Shuttle from the moving Parasail Boat, reverse this procedure. 

 

Summary of Contents for Super Shuttle 02964





















Reviews: