33
SET UP
Inflation
Roll out the product face up on flat ground. Make sure the area is free of
rocks, sticks or other sharp objects that could puncture or damage the
product.
We highly recommend using the RAVE High Speed
Inflator/Deflator. It will provide rapid inflation and deflation.
(Item #01083, not included)
VALVE OPERATION
To lock open valve, depress
the stem and rotate ¼ turn
clockwise. To close valve,
depress the stem and rotate ¼
turn counter- clockwise.
Replace cap on valve after
inflation to ensure air tight seal.
If you are using the RAVE Sports High Speed Inflator
(Item #01083), simply lock the adaptor onto the end of the inflation hose,
turn on inflator, and insert adaptor into valve. Turn ¼ turn to lock in place.
NOTE:
This inflation adaptor and gauge will automatically open the valve
when inserted and will close the valve when removed. You do not need to
manually open/close the valve when using this special adaptor.
IMPORTANT:
For the Dome, Pyramid, Tunnel, Full Tilt, Ninja Quad Steps,
Balance Beam, and Aqua Totter, you must inflate the base first to the proper
pressure. Inflate the upper portion only after the base has been inflated.
Check inflation using the Rave Sports digital pressure gauge. To
operate gauge:
1.
Depress “ON” button.
2.
Wait for Self-Calibration to complete and “0.00”
digital display to appear.
3.
Insert gauge into valve & turn
¼
turn
Clockwise
to lock it in.
