38
Connecting Splash Trax Modules Together
Step 1
Bring two Splash Trax modules together so the oval rings
on the side and the Velcro flaps are facing each other.
Step 2
Two Kwik Lok straps are used to connect two Splash
Trax modules together
1.
Attach the snap hook of one Kwik Lok strap to the outer most ring
on the bottom of one Splash Trax module.
2.
Feed free end of the strap up through the oval ring on the side
of the same module.
3.
Then down through the side ring of the other module.
4.
Then through the bottom ring and back through the metal buckle.
5.
Leave loose for now. Repeat for the second strap.
6.
Tighten both straps until the modules are
tight against each other.
7.
Important: Ensure there is no slack
anywhere in the strapping. Hand adjust if
necessary to ensure it is tight and secure
between all connection rings.
ALL 3 SIDES OF STRAPS
MUST BE TAUGHT
