USER MANUAL
– Safecheck
3
Table of contents
page
1. Introduction
4
2. Warnings & Safety measures
4
3. Principles
5
3.1 How the hydraulic system works
5
3.2 The reference height
5
3.3 Accuracy
5
3.4 Recommendations to increase the accuracy
6
4. Overview of the parts
7
5. Before setup
9
5.1 Capacity of the forklift truck
9
5.2 Maximum pressure in the hydraulic system
9
5.3 Power supply
9
5.4 Make the system free of oil pressure
9
5.5 The condition of the mechanical parts of the forklift truck
10
6. System Setup
11
6.1 Installing the T-part
11
6.2 Mounting the sensor
13
6.3 Position of the indicator
14
6.4 Installing the indicator and the indicator bracket
14
6.5 Mounting the sensor cable
15
6.6 Remove any air from the hydraulic system
16
6.7 Placing stickers, marking the reference altitude
16
7. Settings
17
7.1 Determine the capacity of the truck
17
7.2 Interval setting
17
7.3 Change the delay-time
20
8. Calibration
21
8.1 Preparing for calibration
21
8.2 Correcting the zero point
22
8.3 Weight calibration (single point)
24
9. Bringing the system into service
27
9.1 Auto start
27
9.2 Using the reference height
27
9.3 The indicator
27
9.4 The touch panel of the Safecheck
28
9.5 Enter setpoint value (limit value)
28
10. The functions of the Safecheck
29
10.1 Correct zero point
29
10.2 Gross weighing
30
11. Power supply
32
11.1 Power supply by the trucks battery
32
