Ravanson XPB-700, User Manual

Page: 19 / 62

19
2. Rinsing can be carried out in the spin drying chamber. The spin dryer has a dedicated water inlet (5) -
see FIG. III p. 5 CONTROL PANEL.
To the water inlet opening (5), to the right of the control panel for the washing machine / spin dryer, connect
the appropriate supply hose end (2), having raised the opening plug. Connect the other hose end to the tap -
see FIG. VII. It is recommended to fix it to the tap by means of a clamp (the fixing system is not included in the
washing machine / spin dryer set).
After the first spin drying ends, the laundry in the spin dryer chamber can be filled with clean water
and then spin dried. Repeat that a couple of times.
VI. AFTER THE WASHING MACHINE / SPIN DRYER CYCLE IS FINISHED
1. Disconnect the plug
2. Disconnect the supply hose from the washing machine / spin dryer and water supply (tap)
3. Hang the drain hose up
4. Remove any dirt and fibres from the washing machine and spin dryer chambers, wipe dry
and open all lids to let the residual water evaporate
5. Clean the filter
VII. FILTER CLEANING
– see FIG. VI
The washing machine / spin dryer is equipped with a circulation water filter placed in the washing chamber.
The dirt and fibres settle on the filter mesh. Clean the filter after each washing cycle.
To remove the filter, pull it forwards with high force. The filter should be cleaned carefully under running water,
dried and replaced.
FAILURES
If the device does not start, check if there is no power outage. If there is no power outage, do not try to repair
the device yourself. Disconnect the device and contact an authorised manufacturer's maintenance service. The
appliance must be repaired by a qualified person using only original spare parts.
CLEANING AND MAINTENANCE
Unplug the power cord from the electrical outlet. Allow some time for the device to cool down. Clean the
housing of the device by wiping with a dry or slightly wet cloth. Do not use solvents, petrol or other and other
measures that would damage the device. Do not use any objects which could damage the housing surface. Do
not pour water on the device housing. Do not immerse the plug and supply cord in water.
To wash the washing chamber thoroughly, start a short washing cycle without laundry, then drain the water.
TRANSPORT AND STORAGE
It is necessary to transport in a vertical position. Transport in a package protecting from humidity, dust and
mechanical damages. Store in a package protecting from humidity, dust and mechanical damages. Keep away
from children.
NOTE!
The illustrations and descriptions may differ from reality depending on the product model.
Manufacturer reserves the right to change the technical parameters of the device without notice.
The symbol presented below indicates that the used equipment cannot be placed together with other household waste. The
user is obliged to bring this item to the waste electrical and electronic equipment collection point where a
suitable system is created to allow safe disposal of these items.
Dangerous components present in electrical and electronic equipment have negative consequences for the
environment and human health therefore correct handling of the equipment is very important. Certain
substances which may adversely affect the environment over the life of the product and after use have
been limited in this device.