Ravanson XPB-700, User Manual

Page: 16 / 62

16
CONTROL PANEL – see FIG. III
1. Water inlet to the washing machine chamber
2. Washing timer knob (3, 6, 9, 12, 15 minutes)
3. Work mode selection knob (washing programme):
* gentle - for fine, slightly soiled laundry
or
* standard
- for moderately and highly soiled laundry
* water drain – the washing machine is not equipped with a water pump. Water from the
washing machine / spin dryer chambers is drained by gravity force. When the
knob is in the "
water drain " position, a solenoid valve opens and water goes
to the drain hose.
4. Spin drying timer knob (1 to 5 minutes)
5. Water inlet to the spin dryer chamber
BEFORE FIRST USE
1. After you buy the device, unpack it and remove any transport protections. Check the device
completeness as per FIG. II
2. Place the washing machine / spin dryer on a dry, level, flat and stable surface; do not install it in a wet
room. The washing machine / spin dryer has ventilation openings in the base which must not be
covered in any way. To ensure low work noise, the device should be placed at over 5 cm distance from
the wall/s
3. Inspect the device and its cord for any signs of damage. Do not use when damaged. Do not use the
device if the power cord is damaged.
OPERATION
CAUTION!
Before switching the device on, make sure that the power characteristics comply with the parameters on the
nameplate. This device is equipped with a grounded type plug and must be plugged into a grounded type
outlet.
WARNING!
Before every use, check the appliance and power cord for damage. Never use a damaged machine.
Do not operate the appliance with a damaged cord.
I. CONNECTING THE WATER SUPPLY CORD
– see FIG. IV
To the water inlet opening (1) - see FIG. III CONTROL PANEL, to the left of the control panel for the washing
machine / spin dryer, having raised the opening plug, connect the appropriate supply hose end (2) - see FIG. II
SET. Connect the other hose end to the tap. It is recommended to fix it to the tap by means of a clamp (the
fixing system is not included in the washing machine / spin dryer set).
II. WASHING
1. Prepare the appropriate laundry load, in line with the technical parameters (maximum washing
machine load) and the guidelines below:
2. Attach the drain hose to the drain hole
Remove all loose or metal
objects from the clothes to
be washed, such as safety
pins, clips, coins etc.
Ensure no chemically
contaminated clothes are
washed in the washing
machine.
Some clothes should be
washed inside out. This
refers to socks, knitwear,
trousers, T-shirts and
shirts.
Especially fine objects, like
tights, net curtains or small
ones, e.g. children socks or
handkerchiefs should be
washed only in a net bag or
a pillowcase.