manualshive.com logo in svg

Rauch TAXON 25.1, Operator'S Manual, Page: 39 / 42

Share
Download
Rauch TAXON 25.1 Operator'S Manual Download Page 39

EG-Conformity declaration
according to the machine directive 2006/42/EG

Manufacturer:

Bucher Municipal Wernberg GmbH
Daimlerstraße 18
D - 92533 Wernberg-Köblitz
Documentation responsible person: C. Tretter

Description of the machine (replaceable facility):

Single chamber spreader or double chamber spreader (For design DK!) for winter service

Type:

These are the spreaders of the 

series TAXON 25.1.

Applied harmonised standards:

EN 12100, Safety of machines, basic terms, general design guidelines
Part 1: Basic terminology, methodology

EN 13021, Safety of machines, basic terms, general design guidelines
Part 2: Technical guiding principles and specifi cations

Declaration:

The start-up of the spreader is prohibited until it has been established that the carrier vehicle on which the
spreader is to be mounted meets the regulations of all relevant applicable EG-guidelines!

Wernberg-Köblitz, the 01.09.2019 

 

 

 

    _____________ (Victoria Rasoulkhani)

Place and date of the issue 

 

 

 

 

 

        Name and signature 

Summary of Contents for TAXON 25.1











































Reviews:

No comments