Stand 25.05.2011
Seite 10
Operating instruction TAXON
Page 10
of 42
1.6.5 Tread
If the spreader has a tread at the container (1) as special equipment,
the following must be observed:
• One person may at maximum step onto the tread!
• Step on the tread only with safety shoes!
• Stepping on the tread is prohibited in case of iced or snow-covered
access – Danger of slipping!
1.6.6 Auger
The spreader operates with one auger (One-chamber
spreader) or two augers (Double-chamber spreader).
The auger (1) can seriously injure a person, caught by it,
and under the circumstances even kill him.
Therefore, never remove the device safety cover in
assembled state!
The above general safety and accident prevention regula-
tions must absolutely be observed:
The spreader must never be operated without the device safety cover!
(see page15, p. 1)
1.6.7 Electrical
system
In case of incorrect, careless or gross negligent handling of the system, especially if using it in connection
with damaged cables and plug-in connections, scorching or even scorching fi res may occur under the
circumstances.
• Maintenance and repair work of electrical systems should only be carried out by a specialist!
• Have loose or damaged cables replaced immediately!
• Use only original cables and fuses!
Always disconnect the spreader from the current source (e. g. battery) before maintenance and
repair work!
1.6.8 Lacquer
repair:
• Possibly harmful materials could be generated during the lacquer repair work by lacquer, cleaning
agents, etc. Pay attention to good ventilation.
• Take appropriate measures against inhaling grinding dust during grinding.
Grinding dust is injurious to health.
• Vapours and gases may be explosive!
Hazard of injury and burns!
Pay attention to health information of the manufacturer of lacquers, cleaning agents, etc. and observe
them. Residual lacquers are special wastes and must be deposed accordingly by the user!
1)
1)