Rauch AXIS EMC ISOBUS, Original Instructions Manual, Page: 87 / 102

Requirements for spreading:
• The AUTO km/h operating mode is active (see 4.5.1 AUTO/MAN mode ).
• The fertilizer settings are defined:
○
Application rate (kg/ha),
○ Working width (m)
○ Spreading disc
○ Normal disc speed (RPM)
u Fill the hopper with fertilizer.
In order to achieve an optimum spreading result in the AUTO km/h operating mode, a calibration
should be carried out before starting spreading.
u Carry out a calibration to determine the flow factor or obtain the flow factor from the fertilizer chart
and enter the flow factor manually.
WARNING!
Risk of injury caused by ejected fertilizer
Ejected fertilizer may cause severe injury.
▶
Make sure nobody is present in the spreading zone of the machine before switching on
the spreading discs.
u
AXIS-H only: Press Spreading disc start .
u Press Start/Stop.
The spreading starts.
5.9 Spreading with the MAN km/h operating mode
If there is no speed signal, the MAN km/h operating mode is active.
5. Spreading operation
AXIS EMC ISOBUS 5902180-h-gb-
87