Number
Meaning
Description
[1]
Distance from the field border (in meters) at which the metering
sliders open.
Fig. 48 Distance
on (measured
from field border)
[2]
Distance from the field border (in meters) at which the metering
sliders close.
Fig. 49 Distance
off (measured
from field border)
On this page, you can manually adjust the parameters. See chapter
.
Changing the values
u
Open the desired list entry.
u
Enter the new values.
u
Press OK.
u
Press the Accept values button.
The OptiPoint is calculated.
The machine control unit switches to the GPS-Control info window.
4.4.11
GPS Control info
The GPS-Control info menu informs you of the calculated setting values in the Calculate OptiPoint
menu.
Depending on the terminal used, the display will show 2 distances (CCI, Müller Elektronik) or 1
distance and 2 time values (John Deere, etc.).
•
With most ISOBUS terminals, the values displayed here are applied automatically to the
corresponding settings menu of the GPS terminal.
•
With some terminals, however, a manual entry is required.
This menu is for information purposes only.
•
See the operating manual for your GPS terminal.
u
Access the menu Fertiliser settings > GPS-Control info.
4. Operation
44
5902180-h-gb-
AXIS EMC ISOBUS