Rau 08-AT, Operating Manual

Page: 41 / 44

17
To save a position of the worktop height with the memory function, set the workstation to the height
that you would like to save, press the „S“ key and then the desired memory key.
Comfort control panel
6.4 Operation with a rechargeable battery
The battery box BA001 from Linak has an LED indicator light, which gives information about the state
of charge and generates an audible alarm signal when the battery has to be charged. Charging is via
the enclosed network cable.
Before charging, check that the rated voltage of your local power supply matches that of the
battery. For mobile versions, set the parking brakes before loading.
Connect the network cable of the battery with this as soon as the acoustic alarm signal sounds
for charging and then plug in the mains plug. Do not move the workstation while charging.
Disconnect the power plug as soon as charging is complete and store the power cord securely.
Release the parking brakes before proceeding.
6.5 Disruptions and emergencies
If you are somewhat unclear in the handling of the control element, we hope that we can help you
with a link to the support website of the respective control unit. Please visit the homepage of the
control element you are using.
Standard: https://www.linak.de/produkte/bedienelemente/dpb/#/support
Komfort:
https://www.linak.de/produkte/bedienelemente/dpf-mit-display/#/how-to-store-a-memory-position
If your workstation is no longer moving up, an initialization run must be carried out. Hold down the
down key until the workstation stops in the lowest position. Press the button again and hold it for
another five to ten seconds. Now the workplace can proceed correctly again.
If there is an error with the Comfort control element, the corresponding error code will be shown on
the display. The meaning of the error codes can be found in the following table.