2. Setup
2
2. Setup
For Mac OS X, go to Chapter 2-1.
For Mac OS 9, go to Chapter 2-2.
Restrictions
• At least one SCSI device must supply termination power to the SCSI bus. Read the SCSI device’s manual if
you are not sure whether the SCSI device provides termination power.
• You can not boot up Mac OS from a SCSI device connected to the CB31Pismo. Do not install Mac OS into
the SCSI device connected to the CB31Pismo.
• The total length of cabling on the SCSI bus should not exceed 5ft(1.5m).
• Do not enable virtual memory setting. If it is enabled, mass storage device connected to the CB31Pismo
deosn't work properly. (Mac OS 9.x Only)
