Rational iVario Original Instructions For Use Download Page 88

Page: 88 / 96

15 | Maintenance

88 / 96

Original instructions for use

Maintenance

You can perform the following maintenance yourself:

Replacing the pan lid seal [

}

88]

Replacing the pan valve seal [

}

88]

Defective power cables must only be replaced by RATIONAL, or by your RATIONAL Service Partner.

15.1

General safety information

Wear gloves to protect yourself from being cut on sharp edges of the metal
housing.

Using sharp or pointed tools to replace the seal could damage the unit, preventing
you from obtaining optimum cooking results.

15.2

Replacing the pan lid seal

1. Open the pan lid.

2. Pull the pan lid seal out of the duct by hand, without using tools.

3. Clean the duct using a soft sponge.

4. Moisten the retaining lip on the new seal with soap and water.

5. Start by pressing the seal into the corners of the duct.

6. After that, push the rest of the seal into the duct.

7. Make sure that the new seal is completely within the recess on the pan lid.

15.3

Replacing the pan valve seal

1. Open the pan valve [

}

21].

2. Unscrew the pan valve.

3. Remove the old seal by hand, without using tools.

4. Use a sponge to clean the pan valve opening and cap.

5. Insert the new seal.

6. Screw the pan valve on again.

Summary of Contents for iVario

































































































Search results

Summary of Contents for iVario

Reviews:

Related manuals for iVario

Brands by name

Popular brands

Rational iVario, Original Instructions For Use

Search results

Summary of Contents for iVario

Reviews:

Related manuals for iVario

Brands by name

Popular brands