Rational iVario Original Instructions For Use Download Page 21 | Manualshive

Page: 21 / 96

background image

4 | Working with the unit

Original instructions for use

21 / 96

>

This button will begin flashing:

Pressing that button or the central selection knob will again will stop

lowering the pan.

>

The process stops automatically just before the pan is all the way down. This is a safety precaution.

2. Press this button again:

>

The pan will finish lowering.

You can only start manual operating modes and intelligent cooking paths once the pan is completely lowered.

4.10

Opening and shutting the pan valve

1. To open the pan valve, push the lever on the valve down until it reaches the stop position.

WARNING! Scalding hazard! If the lever is not in the stop position, it could snap back, which would snap the
pan valve shut suddenly. This could cause hot water to splash up.

>

If you open the pan valve during or after a deep-frying process, a signal tone will sound. Close the pan valve
immediately. Otherwise, the oil or grease cannot be disposed of properly via the drain. More information is
available here: Disposing of grease and oil [

89]. Only open the pan valve once the pan is tilted all the way

and has been completely emptied of oil or grease.

2. To close the pan valve, push the lever back into its initial position.

>

This button will be displayed:

Units with pressure cooking (optional)

The pan valve cannot be opened in the following circumstances:

n

Deep-frying is in progress, or has recently finished and the pan has not yet been tilted fully.

n

The pan is too hot.

1. To open the pan valve, press and hold this button:

>

The pan valve will open.

2. To close the pan valve, press and hold this button:

>

The pan valve will close.

>

This button will be displayed:

When the pan valve is open, selecting a manual operating mode or an intelligent cooking path will cause it to shut
again automatically.

4.11

Inserting core temperature probes

CAUTION

Hot core temperature probe

Touching the hot core temperature probe without protective gloves could result in burns.

1. Always wear gloves when working with hot core temperature probes.

«
...
19
20
21
22
23
...
»

Summary of Contents for iVario

































































































Reviews:

No comments

Related manuals for iVario

PoE Injector Adapter POE-32001T

Brand: UNICOM Pages: 1

Brand: Otto Bock Pages: 160

Brand: Zonet Pages: 62

SETU ATA211 SIP-FXS-FXO

Brand: Matrix Pages: 178

Brand: AccuPower Pages: 9

Brand: ISY Pages: 20

Brand: D-Link Pages: 7

Brand: D-Link Pages: 30

Brand: D-Link Pages: 25

DUB-9240 - UWB Wireless USB

Brand: D-Link Pages: 16

Brand: D-Link Pages: 17

DUB-2240 - Wireless USB Hub

Brand: D-Link Pages: 16

Brand: D-Link Pages: 32

Brand: D-Link Pages: 25

Brand: D-Link Pages: 14

Brand: D-Link Pages: 2

Brand: D-Link Pages: 10

Brand: D-Link Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands