Rational CombiMaster Plus 61 Original Operating Instructions Download Page 8

Page: 8 / 88

Initial start-up

8 / 85

During initial start-up of your new device, you will be requested to start an automatic self-

test. This self-test takes about 45 minutes and is used to adapt the device to the specific

environmental conditions. Please note the following:

- For the self-test to be carried out, all the packaging materials must have been removed

from the device; check the grid shelves and the air baffle for a correct fit.

- The device must be connected in accordance with the installation instructions.

- For unit size 6x1/1, 10x1/1, 6x2/1 and 10x2/1 GN, place a flat GN container with the

opening facing downwards in the centre of the grid shelves.

- For unit size 20x1/1 and 20x2/1 GN place two GN-containers in the mobile oven rack.

Place one flat container with the opening facing downwards in the centre in front of both

the upper and lower fan wheel.

Risk of fire!

Remove the packaging material, starter kit as well as grids and containers.

The cooking cabinet door must not be opened during the self-test. Opening the cooking cabinet

door will lead to failure of the self-test. Restart the self-test by switching the device off. Always

allow a hot device to cool down first. If the test is interrupted you will be requested next day by

the device to start the self-test again.

step

info/button

instructions

Open the cooking cabinet door and remove

packaging material, starter kit, grids and

containers.

Insert an empty GN-tray with the opening

facing downwards into the rack in front of

each fan wheel. Please refer to the installation

instructions for further details.

Close the cooking cabinet door to start the self-

test.

Summary of Contents for CombiMaster Plus 61

























































































Search results

Summary of Contents for CombiMaster Plus 61

Reviews:

Related manuals for CombiMaster Plus 61

Brands by name

Popular brands

Rational CombiMaster Plus 61, Original Operating Instructions

Search results

Summary of Contents for CombiMaster Plus 61

Reviews:

Related manuals for CombiMaster Plus 61

Brands by name

Popular brands