Rational CombiMaster Plus 61 Original Operating Instructions Download Page 34

Page: 34 / 88

Steam mode

34 / 85

- After preheating and loading, an acoustic signal and the 00:00 setting in the display will remind

you that you still have to set the required cooking time or core temperature.

- If no further action takes place after the preheat temperature is reached, heating mode is

switched off after 10 minutes.

- Set times or temperatures are fixed after 10 seconds. To change the settings later, turn

the selection button to the zero setting first (at the top) and then adjust the required time or

temperature.

- When the cooking cabinet humidity is queried in steam mode, either 0% or 100% is shown.

100% cooking cabinet humidity is only indicated when sufficient steam has been produced.

- Set the required cooking time. For continuous operation, please turn the selection button

clockwise as far as it will go.

Summary of Contents for CombiMaster Plus 61

























































































Search results

Summary of Contents for CombiMaster Plus 61

Reviews:

Related manuals for CombiMaster Plus 61

Brands by name

Popular brands

Rational CombiMaster Plus 61, Original Operating Instructions

Search results

Summary of Contents for CombiMaster Plus 61

Reviews:

Related manuals for CombiMaster Plus 61

Brands by name

Popular brands