Rational CombiMaster Plus 61 Original Operating Instructions Download Page 67

Page: 67 / 88

Cleaning

67 / 85

step

info/button

instructions

Spray the space behind the air baffle, cooking

cabinet, door seal and inside of the door with

cleaner.

Reset and lock the air baffle and hanging rack

in place, close the cooking cabinet door.

Warning!

Do not open the cooking cabinet door while

cleaning is in progress – chemical cleaner and

hot vapour may escape – risk of chemical burns

and scalding.

Select “prog/start”.

Just turn the selector switch to the right to select

the desired cleaning program – CLES or CLE.

Depending on the cleaning program selected,

either ‘CLES’ or ‘CLE’ appears on the display.

Press the button.

The cleaning program starts.

CLES duration: 20 min.

CLE duration: 40 min.

Warning!

Aggressive chemical fluid – risk of chemical

burns.

It is essential that you use: protective clothing,

safety goggles, gloves and facemask.

Summary of Contents for CombiMaster Plus 61

























































































Search results

Summary of Contents for CombiMaster Plus 61

Reviews:

Related manuals for CombiMaster Plus 61

Brands by name

Popular brands

Rational CombiMaster Plus 61, Original Operating Instructions

Search results

Summary of Contents for CombiMaster Plus 61

Reviews:

Related manuals for CombiMaster Plus 61

Brands by name

Popular brands