Rational CombiMaster Plus 61 Original Operating Instructions Download Page 60

Page: 60 / 88

HACCP

60 / 85

The data is stored for a period of 10 days and can be output via the USB interface on the unit

as required.. To save HACCP data permanently on a USB stick, please follow the instructions.

The USB stick should be connected when the unit is switched off.

step

info/button

instructions

Switch the unit off and insert the USB stick in

the slot underneath the control panel.

Use the selection button to set “prog/start”.

Turn the selection button clockwise.

Appears on the display.

Press the button to transfer the HACCP data to

the USB stick.

When the process has been completed, “end”

appears on the display. Remove the USB stick.

Summary of Contents for CombiMaster Plus 61

























































































Search results

Summary of Contents for CombiMaster Plus 61

Reviews:

Related manuals for CombiMaster Plus 61

Brands by name

Popular brands

Rational CombiMaster Plus 61, Original Operating Instructions

Search results

Summary of Contents for CombiMaster Plus 61

Reviews:

Related manuals for CombiMaster Plus 61

Brands by name

Popular brands